SheepOfBlue
Premium Member
In case I gave a false impression 
Here is a failed super Spitfire. This printed on and off for over a day. For some reason extruder #3 keeps jamming. At first it was some poor filament, poor tolerance then jammed on the reel as the winding was incorrect and it locked. Then I swapped to a better quality for the supports. Jammed once as I had to reset tension on the feed (I had changed it for the low quality stuff) Then it ran fine for hours. Went to bed and it was jammed again sometime in the night. As I was trying to fix it for some reason the entire system faulted and reset. So I had no way to continue....
But here is super Spitfire next to the first one. No head but you can see the size. I could go a little bigger even still but even successful he would be a 24 hour print.
Here is a failed super Spitfire. This printed on and off for over a day. For some reason extruder #3 keeps jamming. At first it was some poor filament, poor tolerance then jammed on the reel as the winding was incorrect and it locked. Then I swapped to a better quality for the supports. Jammed once as I had to reset tension on the feed (I had changed it for the low quality stuff) Then it ran fine for hours. Went to bed and it was jammed again sometime in the night. As I was trying to fix it for some reason the entire system faulted and reset. So I had no way to continue....
But here is super Spitfire next to the first one. No head but you can see the size. I could go a little bigger even still but even successful he would be a 24 hour print.