3D Sheltie model

Calliesmom · Friday at 11:19 AM

if it's supposed to be Spitfire, the one on the right :yes:

but I really like the one on the left :winkgrin:

SheepOfBlue · Friday at 11:46 AM

Calliesmom said:
if it's supposed to be Spitfire, the one on the right
but I really like the one on the left

Closer to a mahogany like Callie was.

RikyR · Saturday at 10:44 AM

Left one for me,

Sharon7 · Saturday at 1:30 PM

I like them both but the one on the right you can see his face better.

Ron Atkinson · Saturday at 3:12 PM

I think that they are both very good. I like the one on the right the best.

SheepOfBlue · Saturday at 4:14 PM

Started a Sca. I was shocked on how much time it is predicted. Though I added a lot of detail to his face. I did the brown/black rings around his eyes. I added brown to his muzzle. Of course his white blaze but also his freckles and black/brown to the nose. I suspect at least one failure

SheepOfBlue · 2026-05-10T12:09:21-0400

EPIC failure

So for some reason the supports were horrid. I stopped it because of that then found out why the print was over two days.

someone had a really bad setting for the nozzle. The ones on the machine are 0.4mm and I had 0.2mm settings. So in plainer language half the actual size not only increases print time but all the flow is wrong. So it would take longer to incorrectly print. Learn from your mistakes

Now the predicted print time is 7 hours vs over 50.

SheepOfBlue · 2026-05-11T09:29:25-0400

Cut one on 3D Sca. I had an idea on eyes and it failed. Needs a little more work on his face brown (he was almost bi-blackish overall) A decent first cut on him though. Oh and he black was 'Galaxy Black' because I got it free. A jet black would be better. I also noticed his blaze goes further up between his ears and also has a freckle. Overall a first cut I am thrilled with.

Calliesmom · 2026-05-11T11:01:09-0400

that's amazing that you can get the colors where you mostly want them :yes: